fbpx

Shipping Container Pools – From Concept to Reality

The Shipping Container Pool by ‘Shipping Container Pools’ in Coolum caught both the Client and Gibson Building’s attention back in the design/concept phase.

Placing the 40ft container perpendicular to the deck and projection out to the north was conceived as a ‘wow’ factor.

The location of the container pool, on a steel portal frame with access via a dedicated ‘bridge’, meant the glass pool fence need only cross the bridge and not the full pool perimeter thus aesthetically and practically a much more pleasing outcome.

 

40ft Shipping Container Pool at Verrierdale, Sunshine Coast

Are they adaptable to any terrain?

The Shipping Container Pool concept which is available in both the 20ft and 40ft versions is adaptable to any above ground installation.

Because the container height is of 1200mm, and can come with a dedicated stair at one end, any above ground installation would be pool safety compliant without the need for pool fencing.

How you place the container relative to slope of the terrain, will impact on cost to provide either a ‘terrace’ 6 metres x 2.5 metres (20 foot container) or a supporting footing system.

 

Engineered Support Steel Structure

 

What’s involved in building a Shipping Container Pool?

Such container pools are supplied by the manufacturer complete including the access stairs, pool equipment etc.

Installation on site will require a suitable base in the form of a concrete slab, crushed rock base, or a perimeter footing system.

Then a permanent underground power supply installed by an electrician will be required for the pump.

Fill with water and you are good to go!

 

The Shipping Container Pool ready to go

 

The Costs of a Shipping Container Pool in comparison to a regular pool

Generally the costs are around $20,000 for a 20ft (6 metres), and around $40,000 for a 40ft (12 metres) Container Pool. To this cost, you will need to add authority approval, base structure, delivery & installation. The costs are comparable to an inground fibreglass pool. The benefits of a container pool is that is can be installed and used pretty much the same day. In principle, it is the infrastructure costs that can be much less for a container pool.  For example, if the Container Pool is free standing no pool fence or additional works is required.

Having a pool flush with an access deck makes for ease of use, however it will require a perimeter pool fence 1200 high with the appropriate gate. Gibson Building recommends a frameless glass pool fence as aesthetically it is unobtrusive visually to the Shipping Container Pool concept.

Perimeter landscaping can help emphasise the outdoor area – provided it does not compromise access requirements.

A Container Pool is intended to display its container perimeter and as such enhance its visibility.

 

Watch the installation process:

Need advice?

If you are thinking about going ahead with a shipping container pool, feel free to organise a meeting with Kieran.

You may also want to check these articles

beacon commercial redevelopment brisbane warehouse

A Commercial Refurbishment for Beacon Lighting, Brisbane

Gibson building was engaged directly by Beacon Lighting to modify an existing Warehouse into a custom-made distribution facility in Brisbane, Queensland. The modification works involved repurposing a warehouse into a purpose made facility to facilitate an expansion of the business for the East Coast of Australia.

Read More »

The Balance of Design and Budget – Tips and Tricks

A Client can initially present some pretty firm ideas on their preferred design concept coupled with a very defined budget. The challenge for a designer is to meet or exceed their design expectations whilst defining a realistic and achievable budget. Read on for some tips and tricks to get your budget and design right – right from the beginning.

Read More »

Avoid Cost Overrun – Follow These Simple Steps

One of the most disheartening experiences for a homeowner is the cost overrun. However, with careful planning and working at the preliminary stage, with the right building professional, there should be no surprises. Follow these simple steps to learn how to avoid an all too common problem.

Read More »

GEA Office Refurbishment Project

Designed and documented by Gladstone Drafting and further collaboratively enhanced with Gibson Building, this major Office refurbishment was transformed into a light and modern multipurpose Office facility.

Read More »